Skip to Top Navigation Skip to Utility Navigation Skip to Search Skip to Left Navigation Skip to Content

Engineering Applications Center

Journals and Conferences

  • "Application of a He3Ne Infrared Laser Source for Detection of Geometrical Dimensions of Cracks and Scratches on Finished Surfaces of Metals”, Nazaryan, N., Campana, C., Moslehpour, S., Shetty, D.  Journal of Optics and Lasers in Engineering volume 51, issue 12, December 2013, Elsevier Publications
  • Investigation of New Generation of Ceramic and Single Crystalline Piezo Materials for Helicopter Blade and  Uav Actuation”, Shetty, D., Campana, C., Nazaryan, N., Manzione, L.  IMECE2013-66649, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, November  2013, San Diego, California, USA
  • Modeling and Experimental Evaluation of Monocrystalline Piezoelectric Materials  for Electromechanical Actuation”, Shetty, D., Campana, C., Nazaryan, N.  IMECE2012-88301, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, November 2012, Houston, Texas, USA
  • Stand-Alone Surface Roughness Analyzer” Moslehpour, S.; Campana, C.; Shetty, D.; Deryniosky, B.; IEEE Transactions on Instrumentation and Measurement, Volume 58,  Issue 3,  March 2009 Page(s):698 – 706
  • New Approach to the Inspection of Cooling Holes in Aero-Engines”, Devdas Shetty, Tom Eppes, Claudio Campana, Nikolay Nazaryan. Journal of Optics and Lasers in Engineering. Volume 47, No. 6, June 2009, Elsevier publications.
  • Opto-Mechanical Methodology for Feature Detection of Contours” Shetty D., Campana C., Dinan R., Gurimitkala A., Nazaryan N., ASME  International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA
  • A New Precision Non-Contact Laser-Based Hybrid Measurement Methodology” Shetty D., Ghosh S., Campana C., Atalay M., ASME  International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA
  • Celmer, Robert., "Multimedia Instruction of Acoustics", Annual Meeting of the American Society of Engineering Educators, Anaheim, CA, June 1995.
  • Godbout, L.F., Shetty. D., and Kolk, R., "Sensing, Modeling, and Control Using Visual Programming", International Conference On Recent Advances in Mechatronics, Istanbul, Turkey, Aug. 1995.
  • Godbout, L. F., Chow, J., and Jordon, D., "State Observers for Multirate-Sampled Linear Systems" To be submitted.
  • Gobout, Louis, Shetty, D., and Kolk, R., "Mechatronic Control Using Visual Programming" Presented at the International Conference on Recent Advances in Mechatronics, ICRAM '95, August 1995. Also published in recent Advances in Mechatronics, UNESCO, pp. 633-637.
  • Keshawarz, M. S., Godbout, L. F., and Conzelman, E., "Statically Determined Beam Deflection Analysis Using Visual Programming", 2nd International Conference in Civil Engineering on Computer Applications, Research and Practice, Bahrain, April 1996.
  • Lewis, C. G., Nowak, M. D., Kilnnert, J., "Cortical Bone Grafts in Supracondylar Femoral Fractures with Medial Allograft Strut Support". Submitted to J. Biomechanical Engineering, 1995.
  • McEleney, E., Donovan, M., Shea, K., Nowark, N. D., "Initial Failure Strength of Orthoscopic and Open Bankart Repairs". Artnroplasty 11(1). 1995.
  • Shertukde, H. M., Kolluri, B., and Tucker, L., "Excellence in Engineering Management (E2M) : A Cross Disciplinary Learning Experience at the Graduate Level", 1995 ASEE Northeast Section Spring Conference, CT., April 28-29, 1995.
  • Shertukde, H. M. and Chen, S., "Hardware Implementation of an ATM / B-ISDN Switch", Proceedings Sixth International Conference on Signal Processing Applications and Technology, Boston, October 1995.
  • Shertukde, H. M. and Chen, S., Kulenthiran, S., "Hardware Implementation of an ATM/B-ISDN Switch Using Fuzzy-Neural Scheme". Proceedings Connecticut Symposium on Microelectronics and Optoelectronics, Storrs, CT, March 21,1996.
  • Shertukde, H. M. and Prabhune, U., Alnajjar, H., "Real Time Test Equipment for Partial Discharge Analysis". Proceedings Connecticut Symposium on Microelectronics and Optoeletronics, Storrs, CT, March 21, 1996.
  • Shertukde, H. M. and Prabhune, U., Alnajjar, H., "Fault Detection Device for Electrical Power Transformers Using Novel DSP Scheme". Proceedings ICSPAT'96, Boston, MA, October 1996.
  • Shetty, D., Motiwalla, L., "Intelligent Sensing for Real Time Control". Journal of Applied Manufacturing and Control, Vol. 7, November 2, 1995.
  • Shetty, D., "Optimization of Surface Roughness Analyzer Using Robust Design". Presented at the International Conference on Production Research, Jerusalem, Israel, August 1995; pp. 701-703 Proceedings of 13th ICPR.
  • Shetty, D., "Automatic Synthesis of optimum Design Layout by Algorithmic Approach". Presented at the 13th International Conference on Production Research, Jerusalem, Israel, August, 1995. Pp. 482-1185. Proceeding 13th ICPR.
  • Shetty, D., and Zlatko, S., "A Comparative Analysis of Design for Manufacturing Methods". Reviewed for publication in the Journal of Engineering for Industry, 1996.
  • Shetty, D., Motiwalla, L., Kondo, Jun, Embong, Saat, "Real Time Architecture for Advanced Quality Monitoring in Manufacturing". The International Journal of Quality and Reliability, U. K., 1996.
  • Shetty, D., Kolk, R., "Mechatronics System Design". Book to be published in 1996/97.
  • Shetty, D., Hamdani, Z. "Advances in On-line Surface Roughness Inspection for Supervisory Manufacturing". Presented at The Japan-USA Symposium on flexible Automation ASME/MIT, Boston. July 7-10, 1996.
  • Shetty, D., Nowak, Leone, Soni. "Telemeterized Sensing System for Hip Implant" has been accepted for presentation and publication 1996 ASME International Winter Annual Conference, Atlanta. This work has been done in collaboration with Dr. C. Lewis of the University of Connecticut Health Center.
  • Shetty, D., and Fast, A., "Temperature Measurement in Orthopedic Knee Joints," has also been accepted for presentation and publication at the 1996 ASME International Winter Annual Conference. Professor Devdas Shetty and students J. Kondo and A. Fast are the authors of the paper. This project is a result of sponsorship from Albert Einstein Medical Center, Bronx, NY. By Dr. Avital Fast, Director of Rehabilitation Medicine.
  • Shetty, D., and Hamdani, Z., "Real - Time quality Central using On-line Surface Roughness Inspection", Presented at the International Conference in Manufacturing, CIRP. August 8-10, 1996, Storrs, USA.
  • Waldmeier, M. D., Grasso, J. E., Nowak, M. D., Simpson, J. A., "Fatigue Testing of Cast Removable Partial Denture Alloys". Accepted for 1995 AADR meeting.
  • Waldmeier, M. D., Grasso, J. E., Nowak, M. D., Norberg, G. J., "Bend Testing of Wrought Wire Removable Partial Denture Alloys". Accepted for 1995 AADR meeting.